If you’re looking for a satisfying garden DIY project, try repurposing an old wine barrel. Wine barrels are made of sturdy materials and built to last even long after their original purpose has ended. This makes them excellent candidates for outdoor planters. Here we’ll go over the process and materials you’ll need to make your very own DIY wine barrel planter.
Wine barrel
Circular Saw
Pencil
Chalk line marker
Tape measure
Sand paper
Glasses or eye protection
Ear plugs
Protective gloves
Power drill & spade bit
If you don’t already have a wine barrel sitting around, there are a few ways you can get them. First would be to look at any local thrift or second-hand stores, especially those with outdoor goods. If you have any vineyards or wineries nearby, you can contact them and inquire about helping them recycle. If all else fails you can always turn to online marketplaces to find the materials you need.
First, turn the barrel on its side and use your tape measure to find the very middle. Once you have it, mark it with a pencil all the way around the barrel.
Next, use the chalk line marker on the pencil line to mark where you’ll need to cut with the saw.
Once the middle of the barrel is well-marked, carefully cut along the line using a circular saw. Make sure you and anyone helping you wear protective gear when using power tools. For extra stability, wedge the barrel between two cinder blocks or other heavy material as a brace.
Once you have cut the barrel in half, use your power drill and a spade bit to cut drainage holes in the bottom of the new planters. For a planter of this size you should have at least 4 drainage holes.
Carefully sand the edges of the barrel along where you cut it. This will help you avoid splinters, snags and other hazards when handling the planter.
Repeat steps 4 and 5 for the other half of the barrel.
Now you’re ready to plant! Add a layer of gravel to the bottom of your barrels before your choice of potting mix, then fill with your favorite flowers, plants or herbs. For a super easy gardening hack, place your plants right into the barrel, container and all. Nestled closely together the plants will appear lush and full but be much easier to transplant or remove if you ever need to make changes.
With this project you’ll have created not one but two wooden wine barrel planters. This is an excellent way to repurpose old materials and enjoy the satisfaction of DIY crafts. Now you can enjoy these planters in your garden, patio or even indoors for years to come.
Lori Geraci, ABR, AHWD, GRI, SFR, REALTOR®
Phone: 203-910-0997
E-Mail: [email protected]
Web: www.RealtyByLori.com
I Have:
Experience
Commitment
Hard Work
Enthusiasm
Results